Access Point Setup for Netgear Nighthawk X6S AC4000 router

installing Netgear Nighthawk X6S AC4000 router device for your network will be a best decision for you and there are some advance features that you will get with these devices. You can configure your Netgear router devices with different operating modes and access point mode is also one of them.

When you configure your Netgear Nighthawk X6S AC4000 router as access point device, you can have a new wifi hotspot for your wifi needs. That means you will get a new modem device for wireless wifi access.

Here are the Steps that you will Follow

1.     Connect your Netgear Nighthawk X6S AC4000 router to second router device. you can connect your devices using Ethernet cable.

2.     Provide power supply to both routers and computer device.

3.     Wait for status LED is solid green in color.

4.     Open web browser from computer and fill http //routerlogin.net address and then you can access Netgear wifi router login page.

5.     Fill Netgear login user name and password for your device access.

6.     After that fill “Advanced” from the dashboard.

7.     After that select “Advanced Setup” tab.

8.     There you will find “Wireless AP” point so click on that button. Go and have a look at the procedure for changing password for Netgear routers.

9.     Enable the “Access Point” for Netgear Nighthawk X6S AC4000 router device and click on “Apply” button.

These are the steps for making access point settings for your Netgear Nighthawk X6S AC4000 router devices. Later you can access http //routerlogin.net address for your device settings and then you can have all kind of dashboard settings for your devices.  

LED lights for Dlink 365 Router devices

If you are installing advance dlink 365 device to your wifi network then you can get best configurations for these devices using the status LED lights. These status LED lights will help you to get the setup details for your dlink devices. Using Dlink login page you can find that status LED details for your dlink device. the status LED lights that we are explaining in this article are common for all dlink wifi router and extender devices.

Here are the Status LED Lights Explained for Dlink  365 Devices 

1.     Using internet status LED for your device you can make sure that your dlink device is connected to internet wifi connections accurately. This status LED will be OFF when you are not having any kind of wifi connections. Go and check the SharePoint settings for the Dlink devices using the blog here.

2.     When you dlink device is ready to work then the status LED will be solid green in color.

3.     When you connect any USB device to your dlink device then the WCN status LED will be solid green. You can share that USB device to other computer devices.

4.     When you device is receiving accurate power supply then the power LED will be solid green I color. If you find that your dlink login power status LED is not glowing at all then you can check the power supply for your device once again.

5.     When you connect any computer device to your dlink device then the local network LED lights will be green in color. There are 4 status LED lights that you can find with your device that means you can connect up to 4 cable device to your dlink at a time.

These are the various status LED lights that you will get with your dlink device.