Change name for Netgear AC1200-WiFi Range Extender

Netgear AC1200 wifi extender device will allow you to change default SSID name and this SSID name is known as wifi name for that device. when you change the default SSID name for Netgear AC1200 extender device, you will need to reconnect your computer mobile devices with www mywifiext net setup page. In this article, we are explaining steps for changing the default network name for your Netgear AC1200 wifi extender device.

Here are Steps to Change Default Name for Netgear AC1200 WiFi Extender Device

1.     For any kind of changes to your device settings, you will need to connect your Netgear AC1200 wifi extender device to a computer. So, connect your device with a computer.

2.     After that start computer device and open web browser.

3.     Type Netgear wifi extender login web address to the address bar.

4.     Fill Netgear extender login user name and password to the login page and then you will able to access www mywifiext net setup page.

5.     Click on “Menu” button that is used to change the wifi or any other wireless settings for your device.

6.     Click on “Settings” button.netgear ex7300 extender setup using wps button

7.     After that select “Wireless” button so that you can change the wireless settings for device you are using.

8.     Change network name for your device and then click on “Save” button.

These are steps that you will follow and then you can change the network name for your device. these steps will only change the network name for your device and if you want to change the default login password for your device then you will need to follow some different steps and all those steps are explained in other articles.    

User Access Controls for Amped wifi extenders

For the easy control onto the Amped wifi extenders, you can set the schedules of for the enables and disabled to the wifi whenever you require through its access schedule features. This feature works on both the Home networks and the extended networks as well. To make this feature working you will have to do some settings for this the steps to be followed as mentioned here.icant access amped wireless login page,what can i do.

Step 1:-Enable the access schedule by visiting on to the address 192.168.3.1amped wireless setup.

Step 2:-Here you have to select the days on which you want to access wifi to be available.

Step 3:-After selecting the day you need to select the time frame on which you wish for the availability of wifi.

Step 4:-Click on the apply button to make changes applicable.

Enabling the access schedule will also be work for disabling the internet access for wired connections as well for specified days.

Note:-Before above settings make sure that you have already configured the clock of the system in order for the schedule to work properly. If you need to adjust the time you adjust the time zone settings from the web menu under Management>Time zone settings.

User access control:-

                                   This feature is very useful as with the help of this you can allow and deny the access of the internet to the specified users who are connected wirelessly to the extended network. A unique code which is called a MAC address available with each device. The MAC number is a 12 digit code number.

By input the MAC address in the settings by visiting on the address 192.168.3.1 amped wireless setup of the extender you can be defined that this device is allowed in the network or not to access the internet on this network.

TP-Link router to work with a Cable Modem

To connect the TP-Link router to work with a cable modem you have to make sure some of the tasks should be completed before. Which areas mentioned below.

1. Turn off the modem, computer, and the router.

2. You have to connect the modem via Ethernet cable to the wan port of the TP-Link router, With the help of Ethernet cable connect the main computer to TP-Link router's LAN port.

3. Gove the power to your router first then after giving power to modem and computer.

Follow the steps mentioned to make TP-Link router to work with cable Modem.what is a wifi network and how its work.

Step 1:-Login to the web-based utility of router tolinkwifi.net.Whatis-tp-link.com

Step 2:-Click on

Network>WAN on the menu after login and configure WAN connection type. Select here Dynamic IP as the WAN connection type on the web page right side. Click on the save button.

Step 3:-You have to wait for few minutes and then check WAN part on the status page. If it is showing the IP address that means the connection is established between the router and modem. If no any WAN IP address you have found then move to next steps.

Step 4:-Click on the network than on MAC Clone after scroll down and click on Clone mac address. After that click on the save button.

Step 5:-Now check here for the IP address by visiting on tolinkwifi.net. If you did not found any wan IP address then you need to restart the cable modem, wait for 10 seconds and restart the router.After completion of the restart process, you should get the Wan IP address and Internet connection.

Take care that some of the cable modems have a battery inside for power back up. Before the restart process removes these batteries and then unplug the power supply completely from the modem and check for the IP address after the restart process.

Steps for changing the network name

Sometimes you fill the internet speed issues that it is slow down suddenly. You have to make sure that the system is connected to the right router. To check this switch off the router and check your computer or laptop. If it found any connected network then you might have to change the SSID of the router.

There are two methods which can be followed to change the network name.

Method 1:-

Step 1:-Enter the address http://dlinkrouter.local into the address bar by launching the browser. You will be prompt to the page DlinkRouter Login.

Step 2:-Here you need to enter the password for your admin account in the given field. If the password is not changed from the default then leave it blank.

Step 3:-Click on the wireless from the drop-down menu by moving the cursor to the setting.

Step 4:-Type a new SSID next to the space of Wi-Fi name. In order to access the wireless network, the wirelesses clients need to connect tone SSIS. Wireless clients configurations may require filling for this. You have to specify the different SSID for the 2.4GHZ.front panel of dlink di-sr router explained.

  Step 5:-To save the configuration click on save settings.

   Method 2:-

Step 1:-Go to the webpage address https://www.mydlink.com and you will reach to the Dlink Router Login page

Step 2:-With your existing mydlink login id and password log in to account.

Step 3:-Here you have to choose the router from my devices options. Then go to setting tab

Step 4:-Go to basic settings where you have to enter the new SSID in the wifi network name field.

Step 5:-If you have made changes then save settings here.

Step 6:-Here you will have a window which asks you to confirm for applying the new settings to routers. Click on YES to confirm the settings to apply. It will take up to 80 save the changes and reboot the device.