netgear wifi extender n300 setup without wps

This article will guide you through the various steps involved in the manual setup process for your NETGEAR Wi-Fi extender.  For this make sure that your NETGEAR extender has already connected to the router that you are using and has obtained the valid IP address. Check out all about the WMM or the wifi multimedia here 

The following are the various steps that allow you to set up the extender using the manual setup

•             First of all, you have to connect your computer to the NETGEAR extender via Ethernet cable. 

•             In the next step, you have to open the web address bar on your browser and type the web address as http://myWiFiext.net or you can search the web as mywifiext extender login and then press enter.

•             After that, you will be prompted to enter a username and password for the login.  The default username is admin and the default password is the password for your NETGEAR extender device. 

•             After you logged in successfully, go to the Setup under the Wireless Settings.

•             Then go to the Security options and check the value in the Password field.  Make sure that the password is same as your router password if the password does not match then change the password to match your router password.

•             Click on Apply to save the change you made and to proceed further.

•             After that, you have to reconnect your Wi-Fi devices to the NETGEAR range extender.

Follow the various steps shown below if you have a NETGEAR Wi-Fi extender without an Ethernet port.

•             First, reset your NETGEAR Wi-Fi extender to the factory default settings.  For doing this, you need to press and hold the Factory Reset button on the side panel of your Wi-Fi extender for at least 10 seconds.

•             Then connect to the extender via Wi-Fi.

•             Then go to the web user interface for the login.  For more information regarding the NETGEAR manual setup process, you can search the web as mywifiext extender login.

Linksys Max-Stream AC2200 router

From our couple of days research, we have found that many of you are looking for the features of Linksys Max-Stream AC2200 router and tp link router setup.  In this article we are going to discuss the features of the Linksys router as well as howto set up to link router.

Features of   Linksys Max-Stream AC2200 router.

1-   Linksys Max-Stream AC2200 router works with Amazon Alexa.

2- Many of you have a doubt that this is a refurbished product, but no it is not a refurbished product on this product you will get 90 days warranty.

3-   Linksys Max-Stream AC2200 router has 4 external antennas. Which means it can expand more than a small Normal house.

4- It also has  4 Gigabit Ethernet ports for wired speeds 10x faster than standard Ethernet for printers, game consoles, and Smart TVs.

5- This router has auto firmware updates which mean your router updated with latest features and security measures.

6- For better network efficiency it has MU-MIMO+ Airtime fairness. Get the detailed description regarding the features and functionalities of AC300 here

7- It can provide speed up to 2.2 Gbps.

How to set up the TP-Link router.

1- At first connect your computer with your router via ethernet cable.

2- Then plug in your router as well as computer and turn on the power.

3- Then connect to the wireless network broadcasted by the router.

4- Then open Any of the web browsers on to your computer or laptop, then on the address bar of the web enter your router default IP address.

5- Now a new login page of your router will open, where you have to enter your router default username and password.

6- Then go to quickly set up. Click next to continue.

7-Then type the SSID that you want to use with your wireless network.

8- Then set up your router security.

9- Click next to finish.