TP-Link router to work with a Cable Modem

To connect the TP-Link router to work with a cable modem you have to make sure some of the tasks should be completed before. Which areas mentioned below.

1. Turn off the modem, computer, and the router.

2. You have to connect the modem via Ethernet cable to the wan port of the TP-Link router, With the help of Ethernet cable connect the main computer to TP-Link router's LAN port.

3. Gove the power to your router first then after giving power to modem and computer.

Follow the steps mentioned to make TP-Link router to work with cable Modem.what is a wifi network and how its work.

Step 1:-Login to the web-based utility of router tolinkwifi.net.Whatis-tp-link.com

Step 2:-Click on

Network>WAN on the menu after login and configure WAN connection type. Select here Dynamic IP as the WAN connection type on the web page right side. Click on the save button.

Step 3:-You have to wait for few minutes and then check WAN part on the status page. If it is showing the IP address that means the connection is established between the router and modem. If no any WAN IP address you have found then move to next steps.

Step 4:-Click on the network than on MAC Clone after scroll down and click on Clone mac address. After that click on the save button.

Step 5:-Now check here for the IP address by visiting on tolinkwifi.net. If you did not found any wan IP address then you need to restart the cable modem, wait for 10 seconds and restart the router.After completion of the restart process, you should get the Wan IP address and Internet connection.

Take care that some of the cable modems have a battery inside for power back up. Before the restart process removes these batteries and then unplug the power supply completely from the modem and check for the IP address after the restart process.

D-link wireless router IP address admin password

For access to the admin, you must know your IP address and your login credentials. D-Link routers have a default set of passwords and username which are used in the very first configuration.

Your D-link router password helps you to protect your network from unauthorized access. Your customized settings, like port forwarding options and critical system setting, and DNS servers can be accessed with your credentials.

D-Link Default Passwords

Although not mandatory but it is strongly recommended to change your default router password since the default password is known to all, anyone within the range of your modem can modify and gain access to your network and confidential information being transferred through that network.

Should You Change the D-Link Default Password?

As already mentioned, yes it is required, not technically but from the safety point of view. That is, you can easily have your admin access with your default password for as many times you log in with the same password. But default passwords are not suggested to be kept for a longer duration. Since it only takes a lot less time to modify the password, one could argue that there is no downside to doing it on www tplinkwifi net login 

You may wonder that since your network range covers only up to your office area and hence no intruder will ever have access to your connection, but as we all know the fact that prevention is anyways better than the cure, you must use your default password for a long time. Go through the steps here that can help you in removing the network profile from Windows 8.

However, it's rare to need entree to the router settings, particularly if you're not one to make network-wide changes, which only makes it simpler to forget (unless you could keep it in a free password manager).

Following are the default login credentials for D-Link routers:

1. For models DI-514, DI-524, DI-604, DI-704, and DI-804, username is “Admin” and password is none. The default IP is http://192.168.0.50.

2. For models, DGL-4100, DGL-4300, and DI-701, there is no username and password, so just leave them blank. The default IP is http://192.168.0.20.

3. For other models, enter both default username and password as “admin”. Enter default IP as http://192.168.0.50.

Linksys Max-Stream AC2200 router

From our couple of days research, we have found that many of you are looking for the features of Linksys Max-Stream AC2200 router and tp link router setup.  In this article we are going to discuss the features of the Linksys router as well as howto set up to link router.

Features of   Linksys Max-Stream AC2200 router.

1-   Linksys Max-Stream AC2200 router works with Amazon Alexa.

2- Many of you have a doubt that this is a refurbished product, but no it is not a refurbished product on this product you will get 90 days warranty.

3-   Linksys Max-Stream AC2200 router has 4 external antennas. Which means it can expand more than a small Normal house.

4- It also has  4 Gigabit Ethernet ports for wired speeds 10x faster than standard Ethernet for printers, game consoles, and Smart TVs.

5- This router has auto firmware updates which mean your router updated with latest features and security measures.

6- For better network efficiency it has MU-MIMO+ Airtime fairness. Get the detailed description regarding the features and functionalities of AC300 here

7- It can provide speed up to 2.2 Gbps.

How to set up the TP-Link router.

1- At first connect your computer with your router via ethernet cable.

2- Then plug in your router as well as computer and turn on the power.

3- Then connect to the wireless network broadcasted by the router.

4- Then open Any of the web browsers on to your computer or laptop, then on the address bar of the web enter your router default IP address.

5- Now a new login page of your router will open, where you have to enter your router default username and password.

6- Then go to quickly set up. Click next to continue.

7-Then type the SSID that you want to use with your wireless network.

8- Then set up your router security.

9- Click next to finish.