Linksys Router 10/100 5-Port

The EtherFast 10/100 5-Port Switch on Linksys Router gives an easy and flexible way to expand your network's performance while transferring to the power of Fast Ethernet. It is intended to satisfy the needs of small companies, medium-sized businesses, and small-office/home-office systems, and it enables you to run high-end video, multimedia, and another speed-intensive application at high speeds.

With support for half- and full duplex speeds, the panels enable your interface to run at 10 Mbps, 20 Mbps, 30 Mbps, 100 Mbps, and an impossible 200 Mbps, which presents a cost-effective answer if you ever choose to update your Ethernet network.

 The EtherFast 10/100 5-Port Switch on Linksys Routers reduces data band bandwidth limitations, optimizing network achievement while defending your purchase in your current infrastructure.

By moving your whole network to 100 Mbps Fast Ethernet with the EtherFast 10/100 5-Port Switch, you will have the capability to increase your network's performance with dedicated, full-duplex bandwidth on every port. Have the complete information in the network map tool settings for the Linksys router device here.

·        10/100 dual-speed per-port autosensing

·        Transfer rates of up to 250 Mbps in full-duplex control

·        Ideal for optimizing 10-BaseT and 100-BaseTX device on the same interface

·        Eliminate bandwidth constraints and clear up bottlenecks

·        Uplink port for natural expansion and maximum scalability

EtherFast 10/100 Workgroup Switch is an accessible, affordable way to create a fast, reliable desktop Ethernet network. Connect up to 5- 16 devices computers, storage, modems and printers with a performance that helps you get more done faster on 

www myrouter local

Setup of Ports:

1.     Be assured all of the devices you will correlate to the Switch are switched off.

2.     Attach a Category 5 Ethernet network wire to one of the numbered panels on the Switch. Then join the other end to a computer.

3.     Repeat step 2 to connect additional computers.

4.     Attach a Category 5 Ethernet network cable to the Uplink port. Later connect the other end to a router or additional switch.

5.     Correlate the supplied power adapter into an electrical outlet.

6.     Power on the devices correlated to the Switch. Each current port's corresponding LED will light up on the Switch's front panel.